Blog

Cranio. 2021 Mar;39(2):113-118. doi: 10.1080/08869634.2019.1587854. Epub 2019 Mar 25.

ABSTRACT

Objective: To assess the association between self-reported awake bruxism (AB) and the chronotype profile among Brazilian, Portuguese, and Italian dental students.Methods: A cross-sectional study involving 205 dental students was developed. Self-reported AB as well as information on sleep characteristics were collected from a questionnaire. The Morningness-Eveningness Questionnaire (MEQ) was used to measure the chronotype profile. Descriptive statistical analysis, the chi-square test, and univariate analysis were used to evaluate the factors associated with AB.Results: The prevalence of AB in all groups was 33.7%. The intermediate chronotype profile was the most prevalent (60.4%), and only 16.7% of the participants had the morning profile. The univariate analysis showed that older dental students (OR = 2.640, 95% CI 1.388-5.021) and those with the eveningness chronotype profile (OR = 3.370, 95% CI 1.302-8.725) are associated with AB.Discussion: Students over the age of 22 and those with the eveningness chronotype profile were prone to AB.

PMID:30907703 | DOI:10.1080/08869634.2019.1587854

J Oral Facial Pain Headache. 2019 Spring;33(2):199-204. doi: 10.11607/ofph.2081.

ABSTRACT

AIMS: To assess the correlation between tooth wear and sleep-time masseter muscle activity (sMMA) in a group of healthy young adults who underwent home electromyographic/electrocardiographic (EMG/ECG) recordings with a portable device.

METHODS: A total of 41 healthy volunteers (23 women, 18 men; mean age 28.8 years, range 25 to 40) with good natural dentition underwent a 2-night in-home evaluation with a portable device that allowed a simultaneous sleep-time recording of EMG signals from both masseter muscles and heart rate. The number of sleep bruxism (SB) episodes per sleep hour (SB index), the number of phasic, tonic, and mixed sMMA events per hour, and the total number of sMMA events per night were calculated. All individuals also underwent an assessment of tooth wear on digital casts with the adoption of a six-degree rating scale. Correlations between sMMA variables and tooth wear were assessed using Pearson test. The null hypothesis was that correlation between the two conditions would not be significant.

RESULTS: On average, the SB index was 4.5 ± 2.6, while the total number of sleep-time masseter contractions was 97.2 ± 55.2. Of those contractions, almost 60% were phasic. Average tooth wear was 1.5 ± 0.7, with the canines and mandibular incisors showing the highest wear scores. For all pairwise analyses, correlation values were not significant (P values .11 to .69), with r values ranging from 0.064 to 0.253.

CONCLUSION: The null hypothesis of an absence of correlation between tooth wear and sMMA could not be rejected, implying that tooth wear cannot be used as an indicator of ongoing SB or sMMA. Future studies taking into account the multifaceted nature of tooth wear and the complex natural course of sleep phenomena are encouraged to investigate the issue further, at the individual level.

PMID:31013339 | DOI:10.11607/ofph.2081

Int Orthod. 2019 Jun;17(2):365-374. doi: 10.1016/j.ortho.2019.03.019. Epub 2019 Apr 22.

ABSTRACT

This case report discussed a combined surgical-orthodontic rescue of two impacted teeth in a large dentigerous cyst by the means of fixed orthodontic appliances. After careful evaluation of the 3D radiographic exams, extraction of the deciduous elements was carried out, followed by marsupialization and orthodontic traction of the impacted teeth. Surgical procedures, pre- and posttreatment records and orthodontic biomechanical evaluations are discussed.

PMID:31023587 | DOI:10.1016/j.ortho.2019.03.019

Nanomaterials (Basel). 2019 Jul 12;9(7):1010. doi: 10.3390/nano9071010.

ABSTRACT

The analysis of forces, moments and pressure points has long been of great interest in orthodontics. Hence, we set out to define a method for measuring the pressure exerted by aligners on the teeth, and specifically to identify the precise points of pressure exertion. Intraoral scans were performed on a patient with optimal alignment and levelling before and after 2º vestibularisation of the upper central incisor. Pressure sensor film was placed in a dedicated housing between the aligner and teeth in order to record the pressure exerted after 15 s of aligner application. The images captured by the film were scanned, digitised, and subsequently analysed. Areas and amounts of pressure generated by the aligners were evaluated, and the net force of each was calculated, adjusted to take into consideration passive values. The method revealed the areas of contact by which the aligner transmits force on the teeth, and the pressures at which it does so. The pressure exerted by an aligner is not evenly distributed across the entire surface of the tooth during lingual tipping of an upper incisor. The areas of force concentration were not identical, as these are influenced by factors resulting from the manufacturing and casting processes.

PMID:31336979 | PMC:PMC6669747 | DOI:10.3390/nano9071010

Acta Otorhinolaryngol Ital. 2020 Feb;40(1):50-56. doi: 10.14639/0392-100X-2290. Epub 2019 Sep 30.

NO ABSTRACT

PMID:31570902 | PMC:PMC7147537 | DOI:10.14639/0392-100X-2290

Clin Oral Investig. 2020 Apr;24(4):1395-1400. doi: 10.1007/s00784-019-03098-2. Epub 2019 Oct 24.

ABSTRACT

OBJECTIVE: A smartphone-based ecological momentary assessment (EMA) strategy to collect real time data on awake bruxism (AB) has been recently introduced. The aim of this study was to assess the compliance with its use over 1 week in a sample of healthy young adults.

METHOD: Sixty (N = 60) healthy young adults (mean age 24.2 ± 4.1 years) used a dedicated smartphone application that sent 20 alerts at random times throughout the day. Upon alert receipt, the subjects had to report in real time their condition among five possible options: relaxed jaw muscles, teeth contact, teeth clenching, teeth grinding, and mandible bracing. Compliance rate with the app was assessed at the individual and group level in terms of percentage of answered alerts as well as number of days that were needed to reach the targeted observation period of 7 days with a compliance of at least 60%.

RESULTS: The mean compliance recorded with the smartphone application was 67.8% of the total alerts. On average, 9.8 ± 3.2 days (range 7-19) have been necessary to achieve the targeted goal of 7 days with a minimum of 60% alerts/day. No gender differences were detected in any compliance data. Response rate was not different during weekdays or weekends.

CONCLUSIONS: This investigation is the first attempt to assess individual compliance with EMA for reporting awake bruxism. Results suggest that a smartphone-based strategy can have interesting potential. The compliance rate reported in this study will serve as a comparison standpoint for future investigations.

CLINICAL SIGNIFICANCE: Based on the recent multidisciplinary focus on the study of awake bruxism, EMA has emerged as a potential approach for use in the clinical and research settings. This investigation suggests that compliance with such strategy is good, thus making it worthy of adoption for the assessment of AB and its clinical implications.

PMID:31646395 | DOI:10.1007/s00784-019-03098-2

Am J Orthod Dentofacial Orthop. 2020 Feb;157(2):218-227. doi: 10.1016/j.ajodo.2019.03.024.

ABSTRACT

INTRODUCTION: The aim of this study was to investigate the vestibular anatomy of teeth in samples of adult Italian and Mozambican subjects in ideal occlusion and permanent dentition and identify any anatomic characteristics that may influence bonding in the straight-wire technique.

METHODS: Linear measurements and coordinates of each curve representing the clinical crown height and width of each tooth were acquired from digital models of each subject categorized to 1 of 2 groups: Italian (18 males, 22 females; mean age, 29.6 ± 5.7 years) or Mozambican (14 males, 15 females; mean age, 23.4 ± 5.9 years). All subjects had normal dentition and no previous orthodontic treatment, fillings, or prostheses. Method error and systematic error were calculated according to the Dahlberg formula (S2 = ∑ d2/2n) and dependent Student t test (P <0.05), respectively. Tooth symmetry was investigated through a paired-samples t test (P <0.05) and sex difference via an independent-samples t test (P <0.05). After neither asymmetry nor sexual dimorphism was found, all data were pooled, inverting the signs of the X coordinates and then mirroring data. Subsequently, a 2-samples t test (P <0.05) and a multivariate cluster analysis were performed on the mirrored data to compare the 2 groups and to identify any within-group diversity for number of clusters for each tooth. Means of all linear measurements and coordinates (crown height and width) calculated for each cluster were reported and compared using a standard 2-samples t test (P <0.05).

RESULTS: Two clusters were identified for the maxillary second premolars and molars in Italian subjects, whereas in the Mozambican subjects, there were 2 clusters for the maxillary first premolars and lateral incisors and 3 clusters for the maxillary canines and central incisors. The mandibular arch was remarkably homogeneous, with only 1 cluster per tooth in each group. In the mandibular arch, statistical differences were recorded between ethnic groups in crown height at the central incisors and second molars and in crown width in the sector from the second premolar to the second molar.

CONCLUSIONS: There were considerable differences both between and within racial groups in crown height, crown width, and numbers of clusters, which should be taken into account during bonding. Although single-bracket placement guides specific for ethnicity may be feasible for the mandibular arch, the significant diversity in number of clusters in the maxillary arch indicates that more accurate bracket placement guides that take into account such heterogeneity are required.

PMID:32005474 | DOI:10.1016/j.ajodo.2019.03.024

J Clin Orthod. 2019;53(9):508-517.

NO ABSTRACT

PMID:32053497

Prog Orthod. 2020 May 11;21(1):12. doi: 10.1186/s40510-020-00312-w.

ABSTRACT

BACKGROUND: To investigate and compare the gap (i.e. fit) and thickness of six aligner systems (Airnivol, ALL IN, Arc Angel, F22, Invisalign and Nuvola) using industrial computed tomography (CT). The null hypothesis was that there would be no detectable differences in either measurement between the aligners investigated.

MATERIALS AND METHODS: Passive aligners of each brand were fitted to one single resin cast prototyped from an STL file from a single patient. The samples obtained were examined under high-resolution micro-CT, and the resulting tomographic microphotographs and volumetric data were compared. 3D analysis investigated the gap volume, the mean gap width and the maximum gap width of each sample. A total of 204 linear 2D measurements were made on 18 microtomographic images to investigate the aligner gap and thickness among different systems. Investigated regions were the central incisor, canine and first molar. The resulting measurements were analysed by ANOVA and compared using Tukey’s post hoc analysis (P < 0.05).

RESULTS: 3D analysis revealed that the F22 displayed lower gap volume and mean gap width, followed by Airnivol and Invisalign, whereas Airnivol the lowest maximum gap width. 2D analysis showed that F22 had the lowest mean gap and aligner thickness at all teeth investigated. Comparison of the 2D point values revealed statistically significant differences between brands in terms of both measurements (P < 0.05), with the exception of six points in the gap analysis and one in the thickness analysis.

CONCLUSIONS: There are differences between the six aligner systems examined in terms of 2D and 3D measurements of aligner thickness and gap.

PMID:32390068 | PMC:PMC7211786 | DOI:10.1186/s40510-020-00312-w

Int Orthod. 2020 Sep;18(3):624-635. doi: 10.1016/j.ortho.2020.05.002. Epub 2020 Jun 10.

ABSTRACT

BACKGROUND: Class III patients are characterized by a deficiency of the maxilla and/or a prognathism of the mandible and require early treatment.

DIAGNOSIS: This case report describes the treatment of a 5-year-old patient with a skeletal class III relationship, a significant mandibular symphysis deviation towards the right side and a different height of the mandibular angles.

MANAGEMENT AND OUTCOME: The patient was treated with rapid maxillary expander combined with miniscrew, facemask and aligners. A functional and aesthetic occlusion in an improved facial profile was established at the end of the orthodontic treatment. Pre-treatment, post-treatment and one year retention records for the patient are presented.

DISCUSSION: Class III patients require early treatment in order to optimize the traditional expander effects; subsequently hybrid anchorage allowed to maximize skeletal advancement. In addition, loss of space for the erupting teeth and dento-alveolar tipping were avoided. The good results of the phase I treatment and of the active retainer meant that a complex case would become relatively simple at the phase II treatment.

PMID:32534993 | DOI:10.1016/j.ortho.2020.05.002